• #1 Gray

    0 out of 5

    #1 Gray provides strong contrast on most metal surfaces during dry method mag particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off while current is still being applied. On material with a high magnetic retentivity, indications can still be formed after the current has been turned off.

    $118.00
  • #2 Yellow

    0 out of 5

    #2 Yellow provides strong contrast on most metal surfaces during dry method mag particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off while current is still being applied. On material with a high magnetic retentivity, indications can still be formed after the current has been turned off.

    $111.00
  • #8A Red

    0 out of 5

    #8A Red provides strong contrast on most metal surfaces during dry method mag particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a powder blower or shaken from a bottle during magnetization, and blown off while current is still being applied. On material with a high magnetic retentivity, indications can still be formed after the current has been turned off.

    $108.00
  • 10 Gauss Field Meter, Un-Calibrated

    0 out of 5

    Rugged, pocket-size meters used to indicate residual magnetism remaining in part after magnetization. Inexpensive, disposable, non certified field indicator.

    $43.00
  • 14A

    0 out of 5

    A highly sensitive magnetic particle powder, 14A fluorescent mag particles are engineered to locate very fine discontinuities in critical parts and applications.

    $998.00
  • 14A Aqua-Glo

    0 out of 5

    14A Aqua-Glo is a highly sensitive water-based magnetic particle suspension aerosol for locating very fine discontinuities in critical applications and difficult to reach areas. 14A Aqua-Glo offers the benefits of a water bath and the convenience of an aerosol. It is ideal for spot inspections and difficult to process situations where bulk processing is impractical.

    $200.00
  • 14A Redi-Bath

    0 out of 5

    14A Redi-Bath, Fluorescent magnetic particles

    $264.00
  • 14AM

    0 out of 5

    14AM is a highly sensitive oil-based magnetic particle suspension for locating very fine discontinuities in critical parts. 14AM provides clear, bright, fluorescent green indications under ultra-violet light for excellent inspection quality and accuracy.

    $232.00
  • 20B

    0 out of 5

    20B is a highly sensitive dry magnetic particle premix for locating fine discontinuities in high volume applications. 20B combines Magnaflux’s best-in-industry 14A magnetic particles and water conditioners into an easy-to-use premix for making water-based magnetic particle suspension. The ultra-sensitive particles provide clear, bright, fluorescent green indications under ultra-violet black light for unbeatable inspection quality and accuracy.

    $244.00
  • 4/0 Lug

    0 out of 5

    4/0 lug for permanent attachment to magnetizing equipment.

    $22.00
  • 7HF

    0 out of 5

    A highly-sensitive oil-based magnetic particle aerosol for nonfluorescent (visible) wet method magnetic particle testing to locate fine and medium discontinuities on finished parts.

    $308.00
  • A-Series Magnetic Bench

    0 out of 5

    The A-Series magnetic benches provide Alternating Current magnetization for finding surface defects during wet method magnetic particle inspection.

  • AD-Series Magnetic Bench

    0 out of 5

    The AD-Series magnetic benches provide 4,000 amps of Alternating Current and 5,000 amps of Direct Current magnetization for finding surface and sub-surface defects during wet method magnetic particle inspection.

  • AX-52

    0 out of 5

    AX-52 is a water-soluble corrosion inhibitor developed specifically for water-based magnetic particle suspensions. It provides excellent corrosion inhibition to protect parts and equipment from rusting.

    $497.00
  • Carrier II

    0 out of 5

    Carrier II is a high-purity NDT-approved suspension vehicle developed specifically for wet method magnetic particle testing.

    $191.00
  • Centrifuge Tube

    0 out of 5

    Centrifuge tube for 14A particles (use with 14A, 14AM, and 20B)

    $190.00
  • Clam Shell Coil

    0 out of 5

    Ensure your magnetic inspection bench fits every part you test with this line of fixed magnetizing coils by outfitting your wet bench to match your range of parts, and optimize magnetic field application. Whether you are testing a large pieces or small bolts, these heavy-duty magnetic coils will help you set-up your Magnaflux machine just the way you need.

    $11,500.00
  • Contact Block

    0 out of 5

    Permits remote testing of parts that are too heavy or too large for processing on unit.  When clamped between head and tailstock, the block supplies magnetizing current to remote prods or clamps through flexible cable (cable not included, see cables and connectors).

    $140.00
  • Copper Contact Pad

    0 out of 5

    Magnaflux copper braided contact pads prevent arc burn by helping maintain proper electrical contact between test parts and contact heads.

    $56.00
  • D-Series Magnetic Bench

    0 out of 5

    The D-Series is one of our most powerful wet magnetic benches. Providing 3-phase Full Wave Direct Current, this MPI equipment offers maximum magnetization for finding surface and sub-surface defects with clearer indications while using minimal power.

  • Daraclean 200

    0 out of 5

    Daraclean® 200 is a low-foaming high-alkaline cleaner for heavy-duty use on most metals, and it is not aggressive on brass, copper and titanium alloys. It is designed for immersion, spray, and ultrasonic applications.

    $880.00
  • Daraclean 212

    0 out of 5

    A foaming, all-purpose neutral cleaning solution meant for a broad spectrum of soils, Daraclean® 212 is formulated with a blend of surfactants, emulsifiers, and corrosion inhibitors, and is safe to use on most metals, while being non-aggressive with aluminum and titanium alloys.

    $219.00
  • Daraclean 235

    0 out of 5

    Daraclean® 235 is a low-foaming, neutral cleaning solution for general use on a broad spectrum of soils and safe to use on most metals, non-aggressive on aluminum, brass, copper, titanium and zinc alloys.

    $1,128.00
  • Daraclean 236

    0 out of 5

    Daraclean® 236 is a low-foaming, all-purpose neutral cleaner for a wide range of soils and safe to use on most metals and removes tarnish from brass, bronze, and copper alloys.

    $1,109.00
  • Daraclean 282

    0 out of 5

    A low-foaming, all-purpose alkaline cleaning solution, Daraclean® 282 is an excellent cleaner for a broad spectrum of soils. Daraclean 282 has excellent soil-rejecting properties and suspends soils until they settle and can be removed by filtering or skimming, extending the life of the cleaner much further than emulsion-type solutions.

    $159.00
  • Daraclean 282GF

    0 out of 5

    Daraclean® 282GF is a high performance cleaner for a broad spectrum of soils. A low-foaming all-purpose glycol-free alkaline cleaning solution with a unique blend of surfactants and corrosion inhibitors, it meets or exceeds the specifications for most aerospace applications for aqueous and alkaline cleaners.

    $1,230.00
  • Daraclean 283

    0 out of 5

    Daraclean® 283 is a low-foaming, powerful alkaline cleaning solution formulated for use on a broad spectrum of soils, composed of surfactants, emulsifiers, and corrosion inhibitors. It is safe to use on most metals and is non-aggressive towards titanium alloys.

    $1,264.00
  • Digital Ammeter & Shunt

    0 out of 5

    The Digital Ammeter & Shunt is used to verify magnetizing current output of magnetic particle inspection equipment up to 10,000 amps on half-wave DC, 1-phase full-wave DC and 3-phase full-wave DC output, and up to 6,000 amps on AC current output.[GE1]

    $2,510.00
  • Digital Hall Effect Meter

    0 out of 5

    The Digital Hall Effect Meter portable gauss-meter measures the strength of AC alternating-current and DC direct-current magnetic fields. The hand-held digital guassmeter features an easy-to-read LCD screen and simple push button operation.

    $3,070.00
  • Echogel 20

    0 out of 5

    Echogel® is an economical, basic-use couplant for ultrasonic inspections, like flaw detection/sizing and thickness gauging, where salt cake or metal corrosion salts are present. It provides good corrosion inhibition and resists viscosity breakdown on salt-caked boilers and other corroded materials.

    $46.00
  • EV6000

    0 out of 5
    $1,880.00
  • EV6000 MG Kit

    0 out of 5
    $2,080.00
  • EV6000 ZP Kit

    0 out of 5
    $2,080.00
  • EV6500

    0 out of 5
    $1,880.00
  • Fixed Coil

    0 out of 5

    Ensure your magnetic inspection bench fits every part you test with this line of fixed magnetizing coils by outfitting your wet bench to match your range of parts, and optimize magnetic field application. Whether you are testing a large pieces or small bolts, these heavy-duty magnetic coils will help you set-up your Magnaflux machine just the way you need.

    $2,585.00
  • Flat Magnetic Coil

    0 out of 5

    These handy portable magnetic coils are great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. Use with any Magnaflux electromagnetic current generators for quick, easy part processing.

    $6,425.00
  • Heavy-duty “C” Contact Clamp

    0 out of 5

    Heavy-Duty Contact Clamp is used for parts up to 7” diameter.

    $1,000.00
  • Heavy-duty braided lead pad, mag kit

    0 out of 5

    Heavy-duty braided lead pad, mag kit

    $406.00
  • Hood Assembly for Mag Kit

    0 out of 5

    Our durable equipment hood or curtains are used to darken the inspection area to levels well below the common standards and create a very functional inspection environment while keeping operator comfort and convenience in mind.

    $3,000.00
  • L-10 Coil

    0 out of 5

    These handy portable magnetic coils are great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. Use with any Magnaflux electromagnetic current generators for quick, easy part processing.

    $1,215.00
  • Lead Contact Plate

    0 out of 5

    Magnaflux lead contact plates prevent arc burn by helping maintain proper electrical contact between test parts and contact heads.

    $72.00
  • Mag Kit

    0 out of 5

    Mag Kit, 39 in / 99 cm head opening, 11 in / 28 cm coil (power pack and 4/0 cables sold separately)

    $6,000.00
  • Magnetic Flux Indicator Strips

    0 out of 5

    Flexible indicators used to detect appropriate levels of magnetic field strength and directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075″, .009″ and .010″ that share  a common depth.

    $175.00
  • Magnetic Particle Test Bar

    0 out of 5

    Test bar contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens.

    $630.00
  • MD-Series Magnetic Bench

    0 out of 5

    The MD-Series multi-directional magnetic bench offers Alternating Current, Half Wave Direct Current and 1-phase Full Wave Direct Current for time-saving multidirectional magnetization which can find defects in all orientations with one mag-cycle.

  • MG-410

    0 out of 5

    MG-410, Fluorescent magnetic particles, 2 lb / 907 g jar, case of 6

    $1,989.00
  • NiCr Test Panels

    0 out of 5

    NiCr Test Panels are ideal penetrant sensitivity comparators. They come in pairs, with panel set crack depths available in 20 microns. NiCr Test Panels allow in use penetrants to be compared against “new, unused” product to determine if the penetrant is performing properly.

    $2,040.00
  • P-1500

    0 out of 5

    P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

    $6,600.00
  • P-70

    0 out of 5

    P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.

    $5,400.00
  • Pie Field Gauge

    0 out of 5

    The magnetic particle Pie Gauge is used as an aid in determining the direction of magnetic fields for detection of discontinuities in ferrous metals.

    $310.00
  • Portable Pressure Sprayer

    0 out of 5

    This portable pressure sprayer will help you speed up your penetrant inspection process by offering fast, consistent and even application of product or water to the part surface.

    $248.00
  • Portable Spray System

    0 out of 5

    30 gal portable Magnetic Particle Spray System with 15 ft recirculation hose and fan pattern spray gun for inspecting large parts during wet method magnetic particle inspection.

    $9,380.00
  • Pyrogel 100

    0 out of 5

    Pyrogel® is a broad temperature range couplant for thickness gauging, flow metering, acoustic emissions testing and flaw detection/sizing. These products contain no polymers and resists drying, making them an excellent choice for long term flow metering applications.

    $1,813.00
  • Pyrogel 7

    0 out of 5

    Pyrogel® is a broad temperature range couplant for thickness gauging, flow metering, acoustic emissions testing and flaw detection/sizing. These products contain no polymers and resists drying, making them an excellent choice for long term flow metering applications.

    $1,137.00
  • QB-1

    0 out of 5

    The QB1 is a Go/No-Go gage to demonstrate the quick break function of 3-phase full-wave DC magnetic particle equipment is functional for superior magnetic particle inspection quality.

    $495.00
  • QB-2

    0 out of 5

    The QB-2 is a microprocessor-controlled shot timer and quick break tester which provide quantitative verification of magnetic particle equipment performance by confirming quick break function and measuring magnetizing shot duration, for better magnetic particle inspection quality.

    $1,780.00
  • QQI

    0 out of 5

    Quantitative Quality Indicators (QQI) are magnetic particle test piece shims with artificial defects used to verify field direction and relative strength. QQI’s are also used to balance multi-directional fields and to increase productivity by minimizing magnetizing shots.  The QQI indicator shims are packaged in sets of five.

    $250.00
  • Rail-mounted steady rest, 3 in riser

    0 out of 5

    Rail-mounted steady rest, 3 in /7.6 cm riser

    $1,393.00
  • Remote control cable for P-Series, 15 ft

    0 out of 5

    Remote control cable for P-Series, 15 ft / 4.6 m

    $435.00
  • Replacement copper braid for contact clamp, 1 x 11 in / 2.5 x 30 cm

    0 out of 5

    Replacement copper braid for contact clamp, 1 x 11 in / 2.5 x 30 cm

    $50.00
  • S-1212

    0 out of 5

    Magnaflux demagnetization units remove any residual magnetism remaining after conducting Magnetic Particle Inspection.  Demagnetization of ferromagnetic parts and materials often requires a requisite to final finishing or to ready an item for its ultimate use.

    $9,600.00
  • S-66

    0 out of 5

    Magnaflux demagnetization units remove any residual magnetism remaining after conducting Magnetic Particle Inspection.  Demagnetization of ferromagnetic parts and materials often requires a requisite to final finishing or to ready an item for its ultimate use.

    $3,600.00
  • Shunt, 1000A

    0 out of 5

    Shunt, 1000A

    $420.00
  • SK-416 Penetrant Testing Kit

    0 out of 5

    Each penetrant testing kit comes with SKL-SP2 solvent removable penetrant, SKD-S2 solvent-based developer, SKC-S remover, SCRUBS® hand cleaner towels, a DYKEM® Brite-Mark yellow paint marker and a shop cloth.

    $112.00
  • SK-816 Penetrant Testing Kit

    0 out of 5

    Each penetrant testing kit comes with SKL-SP2 solvent removable penetrant, SKD-S2 solvent-based developer, SKC-S remover, SCRUBS® hand cleaner towels, a DYKEM® Brite-Mark yellow paint marker and a shop cloth.

    $191.00
  • SKC-S

    0 out of 5

    SKC-S is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing and for removing excess surface penetrant from an inspection area before applying developer during liquid penetrant testing.

    $180.00
  • SKD-S2

    0 out of 5

    A bright white, non-aqueous developer, SKD-S2 creates an opaque white background for high-contrast penetrant testing and quickly draws penetrant out to create stronger, clearer indications for better inspection reliability and sensitivity.

    $228.00
  • SKL-SP2

    0 out of 5

    SKL-SP2 is a solvent removable penetrant for portability, especially for welding operations, and is post emulsifiable for greater resolution of flaw indications. It produces a visible red color contrast, and features outstanding penetrating characteristics.

    $274.00
  • SKL-WP2

    0 out of 5

    Designed for large surface areas and rough surfaces where excess penetrant is difficult to remove with a solvent removable cleaner or emulsifier, SKL-WP2 can be removed with a water spray, either manually or with an automated step. It produces a visible red color contrast for discontinuity identification, and it also has outstanding penetrating characteristics.

    $271.00
  • Small Parts Adapter

    0 out of 5

    Magnaflux adapters permit the use of standard wet horizontal test units for inspection of small parts such as bolts, screws, pins, etc. Mounted directly to either the head (PN 28470) or tail stock (PN 28471) the solid copper adaptors maintain adequate clearance to proper clamping action.

    $275.00
  • Sono 1100

    0 out of 5

    Sono 1100 provides coupling for high-temperature thickness gauging and will maintain acoustic coupling at high temperatures beyond 15 seconds to give ample time to obtain thickness readings. In most cases, the signal strength increases with time to the point of the couplant’s thermal decomposition.

    $1,786.00
  • Sono 600

    0 out of 5

    Sono 600 is a versatile, multi-purpose couplant with a wide operating temperature range for flaw detection, thickness gauging and acoustic emission testing in petrochemical, power generation, automotive, aerospace, food processing equipment and pharmaceutical manufacturing.

    $281.00
  • Sonotrace 30

    0 out of 5

    Sonotrace® is a general-purpose ultrasonic couplant for flaw detection and thickness gauging applications. This glycerin-free couplant is a great choice for applications requiring minimum halogens, sulfur and low melting point metals, and offers good performance at a lower price point.

    $47.00
  • Soundclear 60

    0 out of 5

    Soundclear® 60 is a high-value, general-purpose ultrasonic couplant for flaw detection, flaw sizing and thickness gauging applications. This medium-thick gel couplant contains humectants to improve acoustic performance, reduce product usage and increase inspection time, and offers a good price-to-performance value.

    $48.00
  • Soundsafe

    0 out of 5

    Soundsafe® is a high-performance, general-purpose ultrasonic couplant for flaw detection and sizing, thickness gauging, flow metering and acoustic emission testing.

    $69.00
  • Split Coil

    0 out of 5

    These handy portable magnetic coils are great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. Use with any Magnaflux electromagnetic current generators for quick, easy part processing.

    $5,510.00
  • ST700

    0 out of 5

    The ST700 is an inspection-grade overhead LED UV flood lamp with high-intensity UV-A illumination for non-destructive testing examinations such as fluorescent penetrant and magnetic particle testing.

    $5,500.00
  • Standard Prod Set

    0 out of 5

    These handheld electrodes and contact clamps are convenient for conducting sectional magnetic particle inspections, like welds, castings or forgings, or testing parts that cannot be inspected on a wet horizontal bench, such as large fabrications, tubing, bars and tubular assemblies like aircraft mounts and fuselage sections.

    $615.00
  • Steady Rest

    0 out of 5

    Steady Rests are used to support and stabilize long or heavy parts such as crankshafts during the inspection process.

    $720.00
  • test

    0 out of 5
    $0.05
  • Tool Steel Ring

    0 out of 5

    The Tool Steel Ring / Ketos Ring is a mag particle test piece with pre-drilled holes to simulate subsurface discontinuities. It offers a reliable method of verifying magnetic particle system performance when actual test parts with discontinuities are not available.

    $620.00
  • Ultragel II

    0 out of 5

    Ultragel® II is an industry-leading, high-performance, ultrasonic couplant for flaw detection and sizing, thickness gauging, flow metering and acoustic emission testing.

    $68.00
  • WA-2B

    0 out of 5

    WA-2B is a general-purpose water-conditioning powder to enhance surface wetting and magnetic particle dispersion stability in water-based magnetic particle suspensions. Its unique blend of wetting agents, corrosion inhibitors and anti-forming agents eliminates the need for additional water conditioning agents.

    $88.00
  • Water Spray Gun

    0 out of 5

    Water sprayer for pre and post rinsing of water-wash or post-emulsifiable penetrant system parts, provides optimal coarse spray to help prevent part over-washing.

    $208.00
  • WCP-2

    0 out of 5

    A bright white, opaque NDT contrast paint, WCP-2 provides a high contrast background to improve probability of detection and sensitivity during visible magnetic particle inspections.

    $257.00
  • Y-1

    0 out of 5

    The Y-1 is an AC electromagnetic yoke and the new generation of light weight, ergonomically designed yokes that improve job performance and productivity by reducing operator arm and wrist fatigue when testing in tight, confined and overhead areas. Provides a portable means of creating AC magnetic fields for the detection of surface indications during magnetic particle testing.

    $670.00
  • Y-1 MV Kit

    0 out of 5

    The Y-1 MV Kit includes an ergonomic, light-weight electromagnetic AC yoke and visible magnetic powers for finding surface indications during magnetic particle testing.

    $740.00
  • Y-7

    0 out of 5

    The Y-7 is a durable, high-strength AC/DC magnetic yoke designed to detect surface and sub-surface indications in the most rugged applications.

    $860.00
  • Y-7 MV Kit

    0 out of 5

    The Y-7 MV Kit comes with a durable, high-strength electromagnetic AC/DC yoke and non-fluorescent magnetic powers finds surface and sub-surface indications during mag particle testing.

    $910.00
  • Y-8 MV Kit

    0 out of 5

    The Y-8 is a battery-powered, DC electromagnetic yoke designed to stand up to the most rugged applications. True portability for magnetic particle inspection in the field and remote locations is achieved through a compact battery pack which provides a full 8-hour shift of inspection power.

    $1,220.00
  • YM-5

    0 out of 5

    The YM-5 is a portable permanent magnetic yoke designed with hinged arms and rotating pole pieces to allow a wide variety of test part profiles to be magnetized, while the specially shaped pole pieces permit easy removal from the component for cleaning.

    $765.00
  • Yoke Light

    0 out of 5

    The Yoke Light is an add-on accessory for Y-1 and Y-7 AC yokes which provides focused, visible light to the yoke inspection area when the yoke is activated. The 10 lumens strong light is designed to enhance visible detection of flaws and discontinuities under low conditions and in difficult to reach areas not accessible to a secondary light source.

    $45.00
  • Yoke Test Weight

    0 out of 5

    The Yoke Test Weight is a certified 10 lb weight designed specifically for AC magnetic yokes to confirm the yoke has sufficient strength to perform magnetic particle inspections. Each Yoke Test Weight has a built-in leg positioning guide to assure balanced distribution and accurate test results.

    $140.00
  • ZA-1227 Method A

    0 out of 5

    ZA-1227 systems are compact fluorescent penetrant inspection systems for batch and low volume inspection of small to medium size parts, including aerospace fasteners, automotive parts and surgical implant inspection.

    $11,300.00
  • ZA-1227 Method B

    0 out of 5

    ZA-1633 systems are stand-alone fluorescent penetrant inspection systems for light volume inspection of small to medium size parts, including aerospace fasteners, automotive parts and surgical implant inspection.

    $11,700.00
  • ZA-1227 Method D

    0 out of 5

    ZA-1227 systems are compact fluorescent penetrant inspection systems for batch and low volume inspection of small to medium size parts, including aerospace fasteners, automotive parts and surgical implant inspection.

    $12,800.00
  • ZA-1633 Method A

    0 out of 5

    ZA-1633 systems are stand-alone fluorescent penetrant inspection systems for light volume inspection of small to medium size parts, including aerospace fasteners, automotive parts and surgical implant inspection.

    $21,400.00
  • ZA-1633 Method D

    0 out of 5

    ZA-1633 systems are stand-alone fluorescent penetrant inspection systems for light volume inspection of small to medium size parts, including aerospace fasteners, automotive parts and surgical implant inspection.

    $26,300.00
  • ZAF-2

    0 out of 5

    ZAF-2 is an excellent general-purpose defoaming additive to eliminate and prevent foaming in water-based magnetic particle suspensions, aqueous penetrant developer baths, hydrophilic penetrant remover baths and aqueous cleaning solutions. A few drops of ZAF-2 are enough to eliminate foaming in most water-based solutions.

    $349.00
  • ZE-4E

    0 out of 5

    A Method B lipophilic emulsifier, ZE-4E diffuses into the penetrant to clear the penetrant from the surface of the part being inspected. It is rinsed from the part by water, carrying penetrant off the part surface. Designed to be used with post-emulsifiable penetrants Level 2 ZL-2C, Level 3 ZL-27A or Level 4 ZL-37. Benefits include low volatility and a high flash point, so ZE-4E can be used in open immersion tanks.

    $375.00
  • ZL-19

    0 out of 5

    A water-removable Level 1 penetrant, ZL-19 is designed for use on rough or unmachined surfaces such as castings and forgings to find larger discontinuities in non-safety critical components. It is ideal for inspecting automotive and general industrial components such as engine cylinder blocks, power train components, rocker arms, pistons, steering knuckles, etc.

    $344.00
  • ZL-27A

    0 out of 5

    Post-emulsifiable ZL-27A is a Level 3, high-sensitivity Type 1 penetrant designed for inspections which require maximum process control and reliability, such as safety-critical aerospace testing.

    $336.00
  • ZL-2C

    0 out of 5

    A medium sensitivity penetrant (Level 2), ZL-2C fluorescent post-emulsifiable penetrant is designed to be removed from the part surface by emulsifiers or solvent. With a UV-A light source, indications will appear as a bright green-yellow fluorescence. ZL-2C has a high flash point, and is designed to be used in open dip tanks.

    $394.00
  • ZL-37

    0 out of 5

    Essential for critical component applications, ultra-high sensitivity ZL-37 post-emulsifiable penetrant is designed for detecting fine, tight discontinuities in safety-critical components, such as titanium turbine components, and in high-stress parts, such as investment castings.

    $350.00
  • ZL-4C

    0 out of 5

    Developed for testing materials that can be affected by petroleum-based penetrants, ZL-4C water-based fluorescent penetrant contains no petroleum derivatives and is harmless to materials that can be attacked by petroleum-based solvents, such as plastics. It is also safe for use on ceramics, and it can be used as a leak detector. It is always recommended that the inspection material is tested for compatibility with ZL-4C prior to use.

    $476.00
  • ZL-56

    0 out of 5

    ZL-56, Type 1 fluorescent penetrant, Water washable, Level 4

    $967.00
  • ZL-60D

    0 out of 5

    Developed for testing rough machined surfaces, ZL-60D fluorescent water-removable penetrant is ideal for finding indications in castings, forgings, extrusions and rough surfaces.

    $293.00
  • ZL-67

    0 out of 5

    A high-sensitivity Level 3 penetrant, ZL-67 fluorescent water removable penetrant is designed to find smaller, finer indications in safety-critical components common to aerospace and engineering applications. ZL-67 penetrant is often used to find flaws in investment castings, jet engine components, and highly machined surfaces.

    $565.00
  • ZP-14A

    0 out of 5

    ZP-14A is a water-soluble developer for the enhancing penetrant indications during liquid penetrant inspections. It produces a uniform white porous coating when dry which is easily removed in post inspection cleaning by a water spray. Advantages include bright and highly defined indications, and can be cleaned with water.

    $349.00
  • ZP-4B

    0 out of 5

    ZP-4B is a free flowing, white, fluffy powder used as a high sensitivity dry powder developer for penetrant inspection. It is supplied ready to use and forms a thin film on parts which enables it to enhance indications of ultra-fine discontinuities.

    $237.00
  • ZP-5B

    0 out of 5

    As a complementary developer for penetrant inspections, ZP-5B forms an opaque white coating that makes a contrasting background for indications. This white powder developer is mixed with water for use and disperses quickly to form an opaque white suspension, but must be continually agitated during use to ensure uniformity of mix as developer will settle out on standing.

    $486.00
  • ZP-9F

    0 out of 5

    ZP-9F is a non-aqueous developer made of organic particles, used often in aerosol cans. It produces a fast-drying, opaque white coating and contrasting background for fluorescent and visible penetrant inspections.

    $259.00
  • ZR-10E

    0 out of 5

    Hydrophilic emulsifier ZR-10E is designed to reduce fluorescent background from penetrants on rough surfaces, as well as reducing bleed-out of penetrant from hollow parts. It yields reliable and reproducible test results from post-emulsifier penetrants.

    $344.00