• Select options

    ZR-10E
    0 out of 5

    Hydrophilic emulsifier ZR-10E is designed to reduce fluorescent background from penetrants on rough surfaces, as well as reducing bleed-out of penetrant from hollow parts. It yields reliable and reproducible test results from post-emulsifier penetrants.

    $344.00
    Select options
  • Select options

    ZP-9F
    0 out of 5

    ZP-9F is a non-aqueous developer made of organic particles, used often in aerosol cans. It produces a fast-drying, opaque white coating and contrasting background for fluorescent and visible penetrant inspections.

    $259.00
    Select options
  • Add to cart

    ZP-5B
    0 out of 5

    As a complementary developer for penetrant inspections, ZP-5B forms an opaque white coating that makes a contrasting background for indications. This white powder developer is mixed with water for use and disperses quickly to form an opaque white suspension, but must be continually agitated during use to ensure uniformity of mix as developer will settle out on standing.

    $486.00
    Add to cart
  • Select options

    ZP-4B
    0 out of 5

    ZP-4B is a free flowing, white, fluffy powder used as a high sensitivity dry powder developer for penetrant inspection. It is supplied ready to use and forms a thin film on parts which enables it to enhance indications of ultra-fine discontinuities.

    $237.00
    Select options
  • Select options

    ZP-14A
    0 out of 5

    ZP-14A is a water-soluble developer for the enhancing penetrant indications during liquid penetrant inspections. It produces a uniform white porous coating when dry which is easily removed in post inspection cleaning by a water spray. Advantages include bright and highly defined indications, and can be cleaned with water.

    $349.00
    Select options
  • Select options

    ZL-67
    0 out of 5

    A high-sensitivity Level 3 penetrant, ZL-67 fluorescent water removable penetrant is designed to find smaller, finer indications in safety-critical components common to aerospace and engineering applications. ZL-67 penetrant is often used to find flaws in investment castings, jet engine components, and highly machined surfaces.

    $565.00
    Select options
  • Select options

    ZL-60D
    0 out of 5

    Developed for testing rough machined surfaces, ZL-60D fluorescent water-removable penetrant is ideal for finding indications in castings, forgings, extrusions and rough surfaces.

    $293.00
    Select options
  • Select options

    ZL-56
    0 out of 5

    ZL-56, Type 1 fluorescent penetrant, Water washable, Level 4

    $967.00
    Select options
  • Select options

    ZL-4C
    0 out of 5

    Developed for testing materials that can be affected by petroleum-based penetrants, ZL-4C water-based fluorescent penetrant contains no petroleum derivatives and is harmless to materials that can be attacked by petroleum-based solvents, such as plastics. It is also safe for use on ceramics, and it can be used as a leak detector. It is always recommended that the inspection material is tested for compatibility with ZL-4C prior to use.

    $476.00
    Select options
  • Select options

    ZL-37
    0 out of 5

    Essential for critical component applications, ultra-high sensitivity ZL-37 post-emulsifiable penetrant is designed for detecting fine, tight discontinuities in safety-critical components, such as titanium turbine components, and in high-stress parts, such as investment castings.

    $350.00
    Select options
  • Select options

    ZL-2C
    0 out of 5

    A medium sensitivity penetrant (Level 2), ZL-2C fluorescent post-emulsifiable penetrant is designed to be removed from the part surface by emulsifiers or solvent. With a UV-A light source, indications will appear as a bright green-yellow fluorescence. ZL-2C has a high flash point, and is designed to be used in open dip tanks.

    $394.00
    Select options
  • Select options

    ZL-27A
    0 out of 5

    Post-emulsifiable ZL-27A is a Level 3, high-sensitivity Type 1 penetrant designed for inspections which require maximum process control and reliability, such as safety-critical aerospace testing.

    $336.00
    Select options
  • Select options

    ZL-19
    0 out of 5

    A water-removable Level 1 penetrant, ZL-19 is designed for use on rough or unmachined surfaces such as castings and forgings to find larger discontinuities in non-safety critical components. It is ideal for inspecting automotive and general industrial components such as engine cylinder blocks, power train components, rocker arms, pistons, steering knuckles, etc.

    $344.00
    Select options
  • Select options

    ZE-4E
    0 out of 5

    A Method B lipophilic emulsifier, ZE-4E diffuses into the penetrant to clear the penetrant from the surface of the part being inspected. It is rinsed from the part by water, carrying penetrant off the part surface. Designed to be used with post-emulsifiable penetrants Level 2 ZL-2C, Level 3 ZL-27A or Level 4 ZL-37. Benefits include low volatility and a high flash point, so ZE-4E can be used in open immersion tanks.

    $375.00
    Select options